Rolling machine common failures and how to solve
Auther：1618
Pubdate：2019-11-04 06:08:34
Vacuum roll kneading machine mainly used the principle of physical impact, let the meat in the drum up and down to turn, hit each other, to massage the role of pickling, today we sorted out some of the more common problems.
Some roll kneading machine will have vibration at start-up time, some people think it is a vacuum pump rotation error, oil is too full, which requires timely correct direction of rotation of the vacuum pump, to pump the gas when you pay attention to oil level, don't be full of, there is an obvious cause too much and cause a vacuum pump, if you find the most lard oil level mark, to the appropriate reduced. If the oil level is less than 1/2 of the height of the oil window, the machine oil should be filled timely to ensure the normal operation of the equipment.
Some vacuum pump will smoke, from the exhaust gas out of the oil droplets, generally because the oil one-way valve leakage or blocked full of things, add the wrong oil, the vacuum pump tilt, the beginning is not oil. At this time, it is necessary to disassemble the oil one-way valve, check whether the oil flow into the valve is airtight, check whether the valve is open after the oil submerges, if not, it needs to be replaced, replace the wrong oil with the correct oil, the inlet is half open, and let the vacuum pump rotate for about 2 minutes.
Some problem is launched after roll kneading machine is not running, may be not plug in, the inverter fault, reason, such as thermal relay not reset the need according to the actual situation, check the power to connect, open the electric cabinet cover, to reset the jump of thermal relay, when users check out of frequency converter fault zui to under the guidance of professional personage, or professional and technical personnel to the exclusion of frequency converter fault, to ensure the safety of operation.
For the sake of safety roll kneading machine operator must be trained after the post, roll kneading machine in the operation of the sudden encounter fault or other temporary problems, can not be dismantled, must ensure safety.
